POOL DEMOLTIONS & YARD RESTORATION WE OFFER

----------------------------------------------------------------------------------------------------

Type A Pool Demolition and Yard  Restoration:  

This method pool demolition and removal  is only suitable for future landscaping use of the site. The swimming pool will initially be broken in three places: (i) Shallow end, 3' x 3' hole. (ii) Transition from shallow to deep end, 4' x 4' hole. (iii) Deep end, 4' x 4' hole. The sides of the pool will then be broken down two feet from the top edge. All debris from the pool demolition break out will be left in the pool  except for the steel rebar. The  pool will be backfilled with clean dirt fill from local excavations   will be pressure washed and vacuumed.

----------------------------------------------------------------------------------------------------

_____ Type B:  Pool  Demoltion and Removal

This method is only suitable for future landscaping use of the site. The entire pool is to be removed from the site. All of the gunite, or fiberglass, or vinyl and any plaster, tile and coping debris are to be demolished and removed. Then the  pool will be backfilled with clean fill from local excavations. The backfill soil will be compacted every six inches. The site will be pressure washed and vacuumed.

----------------------------------------------------------------------------------------------------

____ Type C Pool Demolition and Removal For Future Construction:  

Total pool/spa removal, with engineered backfill and . This method is necessary if any future construction over the site, or within five feet of the site, is contemplated, and when dictated by local code.

The entire pool is to be removed from the site. All of the gunite, or fiberglass, or vinyl, and plaster, tile and coping are to be removed from the site. Then a soils engineer will be hired to engineer the backfill, which Bjurman Corporation will install to the engineer's specifications. Average price for engineering has been about $2000.00.